Daily Archives: February 7, 2013
While Chris and I were blocking the body out, Chase was in the booth painting the bottom side of the trunk.We started by sanding the bottom and prepping it for paint. Once in the booth to ensure good adhesion, we applied a good coat of epoxy primer. After that set up we applied seam sealer to the areas where the factory put it. Once that had set up Chase got the ok to go ahead with the color and clear. I think the results look pretty good
This Audi got into a scuffle in a parking lot. The damage is not really all that bad but it did get a bruise or two. First thing, like almost always, is to remove the bumper. After doing that we started the repair. Chris smoothed all the scratches out and was able to fix the hump with a little heat. After working it the repair out, Chase primed it. All this actually happened yesterday. Today we sanded it and set it up in the booth for its turn to get sprayed. Chase shot the bumper early this morning and we were able to put the bumper back on late this afternoon. Tomorrow we will get this one cleaned up and back to the customer just in time for the weekend.