Daily Archives: February 8, 2013
Yesterday we trimmed out the bottom side of the Satellite trunk lid. After allowing ample dry time we were able to flip it back over, block out the urethane primer, clean it all back up and slide it back in the booth. We taped up the bottom side to be sure we don’t get any over spray on the bottom and Chase laid down a really nice slick job. We started by cleaning the panel with wax and grease remover followed by a dusting with compressed air and a tack rag. Now we are ready for sealer. The sealer provides a uniform surface for the color coat. See pictures 2 and 3. Picture 4 is after the application of the color. In this case pure black. The last picture shows the trunk after 3 coats of clear. Chase did a really nice job here. The clear is nice and slick. Very nice job!