Scratch and dent

2013.27.02 - Armada (1) 2013.27.02 - Armada (2) 2013.27.02 - Armada (4)  This Armada has a few battle scars that needed to be addressed so the owner dropped it off get those taken care of today. We started by removing all of the emblems, the tail light and the wiper arm. We do this to ensure a good quality paint job just like the manufacture painted it. Next we sanded out the scratches and filled the dent. After the filler dries we block it out smooth and straighten out the low spot. We then tape up the surrounding areas to keep overspray off of areas we dont want it. A few coats of primer and a couple hours of dry time and this job is ready for the booth. After sanding the primer and the rest of the panel to be painted its time to slide it into the booth for painting. Time got away from me this afternoon so I dont have any pictures of the painting process but I did get one of it done in the booth. Tomorrow we will put this one back together and get it cleaned up and back to the customer. Not bad at all for a days work.
2013.27.02 - Armada (5)

Posted on February 27, 2013, in Collision Repair and tagged , , , , . Bookmark the permalink. Leave a comment.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: