OK, I’m back

Sorry for no update yesterday. It was just one of those days. But welcome back!! We have been working on both the Chevelle and the Camaro all week this week. Lets start with the Chevelle. The doors are off and the trunk is off. Chris has been removing all of the old seam sealer from the drip rails and the rear body panel. That stuff needs to come out to be sure that we seal up all the areas where water can get in as best we can. The bottom and top of the trunk and the inside and outside of the doors have all been sanded prepped and primed. Epoxy primer on the inside and out and slick sand on the outside only. Next step for those panels will be to star blocking out that slick sand to remove the waves and ripples from years of use and the ones that were put there when the metal was stamped out. Once that is done we will start fixing the dents in these panels. While Chase was priming these parts, Chris kept plugging along by sanding on the body. Its dirty work I know, but Chris just loves sanding.