Daily Archives: August 23, 2013

Ahhh, Thats cool

IMG_2434 IMG_2433 IMG_2432 IMG_2431 IMG_2430 IMG_2428 IMG_2424 IMG_2423Today we buttoned up the the A/C and almost all of the wiring. The Column is completely bolted in as well as the A/C control panel. All the hose for the vents have also been run.  This only really leaves the dash to hook up and the inside is squared away.

Color approval!!

IMG_2407 IMG_2409 IMG_2408 IMG_2411 IMG_2410 IMG_2413 IMG_2412 IMG_2415 IMG_2416 IMG_2418IMG_2420 IMG_2419Chase got to work right away this morning on these Chevelle parts that we prepped yesterday. First we wiped them down with a wax and grease remover. Then we used compressed air to blow the dust out of the crack and crevasse then tacked them off to remove the dust. Then the fun begins. The first layer was white sealer. Once that dried, 3 coats of the custom mix light blue went down. That was followed up with 2 coats of high solids PPG clear.  The owner came by this afternoon to check them out and see if the color was what he envisioned. It was! He has approved the color and his wife has approved the color. That means we can roll on with the project. Next week we will see if we can get the top sides of the parts panted.

%d bloggers like this: