Not so blue
We were able to get this 350 in the booth first thing this morning. I helped Chris set it up then I turned him loose on painting it while Jordan and I disassembled the Mustang. The first thing he did was spray a coat of sealer on the repair areas. This will allow the paint to cover better and makes the color look more even. Once that dried, he sprayed several coats of color. Once the color had dried, 2 coats of clear coat finished off the job. He finished just in time to help Jordan and I wet sand the Mustang in the cold rain. Tomorrow we will put this one back together and prep the wheel for paint. The wheel was also damaged in the bump up, but its not bad enough to warrant replacing. So we will match up the color and fix it.