Daily Archives: February 4, 2014

Rubadub

IMG_3526 IMG_3527 IMG_3528The Mustang make over is a little closer to being done. Chris worked the buffer today to bring the shine back up after all the wet sanding was complete. We started wet sanding it yesterday. 1000 grit followed by 2000 grit then finally 3000 grit paper.  When buffing, the best procedure is to start with a heavy cutting compound then switch to a light cutting compound followed by a light polishing glaze. Then a good ole fashioned hand polish will bring the shine back to life.  Chris was able to get 2 of the buffing steps complete. Tomorrow we will get the final polishing glaze done and the hand polish. We should have time to start putting it back together as well.

%d bloggers like this: