To be continued…

This Altima came in today to get the rear bumper and quarter panel fixed up. We started by removing the bumper and trunk interior to access the damaged areas. This way we can see exactly the extent of the damage. Once these parts were removed, it made the trip over to the frame shop to get this quarter panel pulled out to see what the next step will be. It could be that the quarter will have to be replaced, we wont know for sure until its gets pulled. This is one of those thats, To be Continued…

Dang tree

After years and years of backing out of the same driveway, the inevitable finally happened. The owner got just a little too close to a tree that sits just along side of her driveway. We will be replacing the left tail lamp and repairing the quarter and rear bumper. Here you can see Jordan laying down on the job. He said he was taking the bumper off, but Im not so sure. Before the day was done, we got the metal work done and a coat of filler on the damage.With some luck, tomorrow we should be able to get the damaged areas in primer.

Back to black

Today the Mustang took its turn in the booth. We started by cleaning it and taping it up. We masked off the areas that we weren’t painting. Once it was ready to spray, a coat of urethane sealer was applied. Once that flashed, 3 coats of color was sprayed. We followed that with 2 coats of high solids clear coat. This all too the bigger part of the day. We ended up leaving it in the booth for the rest of the day. Tomorrow we still need to paint the side scoop and the left rocker panel. Once those are painted we have to put it back together and get it cleaned up for the customer.