Get your shine on
This is the ’67 Chevelle that we started on last week. This week we were able to get the doors trimmed out, the hood and trunk trimmed out and the top of them painted. Tomorrow we plan on painting the tops of the door tomorrow. Jordan spent some time today wet sanding the hood, so we also will try to get the hood and trunk buffed out. As with all of our High Performance Finishes, we start by applying a coat of urethane sealer. This seals up panel and makes a uniform surface for the paint. Once the sealer was dry, we painted the parts with black base coat. After the base coat went on, we applied two coats to the inside of parts and three to outside parts that will get buffed. We put an extra coat on those parts because of the amount of material that will get removed when buffed. We should post some pictures of that tomorrow or sometime over the weekend.