Cab work

The week before last we were able to get the inside floor and the bottom of the cab sprayed in our Raptor liner as well as the cab coated in Slick sand. You can see Paul spraying the Raptor liner in the first 2 pictures. This was done the day after the epoxy was sprayed in the previous post. Last week Chris and Paul started blocking out the slick sand with 80 grit to expose the low and high areas. They then started the body work on the roof by filling in the low areas and tapping the high areas down with a body hammer. You can see some of the body work on the roof. We will get back on this one tomorrow when some new supplies come in. Its going to be a dusty week here at the shop this week.