Bumped up bumper
This BMW was in tussle with a post in a parking lot. It did a very small amount of damage to the bumper but unfortunately the guys wife wouldn’t let him live it down. So, he stopped by to have it repaired for her. We first removed the bumper to allow access to the back side of the bumper. We heated the bad spots and molded them back to as close to where they were supposed to be as possible. We then filled the low areas and blocked it out to smooth up the area as best as possible. Primer was then put on the repair to fill in the final spots and provide a nice base for the paint. The entire fender was then sanded to ensure a good adhesion for the sealer and paint layers that followed. 2 coats of clear rounded off the repair. Tomorrow we will reinstall this bumper and get the car back to its owner.
Posted on July 15, 2015, in Collision Repair and tagged Arrival, auto body repair, auto body shop, auto paint, Base Coat, Blocking, BMW, Body Filler, body shop, body work, bumper repair, Clear Coat, Jmc Autoworx, paint shop, PPG Paint. Bookmark the permalink. Leave a comment.