Stripping, no not that kind.

  This Chevy truck is in the shop to get its roof repaired. The paint is peeling off of the roof and before long, it will start rusting making the repair much more costly. We started by removing the antenna and third brake light. We then used a razor blade to strip off the clear coat. Once all that was off, we used the same method to remove the white base coat. Its a tedious process but it must be done to ensure the paint does not peel more in the future. We then sanded off all of the factory e-coat. We then put it in the booth and masked off the areas we dont want to paint. Then a coat of PPG’s acid etching primer was sprayed on the bare metal. Once that was dry, we sealed the roof with urethane sealer followed by base coat then 2 coats of clear coat. This process is the best way to ensure that the paint does not peel any more in the future.