Its clear

This is a close up look at our head light restoration process. As you can see the head light in the Suzuki is looking pretty bad. First thing we do is remove the light. Next we sand the light to remove all of the old yellow dead plastic. Once the sanding is complete, we make sure all the edges are sanded by using a scuff pad and a cleaner on the light. When its dry, we set it up in the booth and prep it for paint. We mask off the areas that dont get painted to do a neat and clean job. We have a special process we perform with proper materials to ensure the clear coat sticks to the plastic.  Once that step is complete, we use high quality clear coat on the lights to bring the clear look back. Once the clear is dry, we reinstall the lights into the car. This is the best method I have seen to restore these plastic lights. There are other methods that work, but they must be performed several times a year to stay on top of it. Once this process is done, you can expect years and years of service out of them.