Shine on

The shine is on! After buttoning up a few things this morning, we spent the rest of the afternoon spraying the Cobra. Paul started off by wiping it down and making sure it was clean as possible. Next it was tacked off to remove as much dust and lint as possible. Then it was time to start spraying. The first two pictures show the Cobra in base coat. As you can see its black but has no shine. Paul sprayed 3 coats of color the followed that up with 3 coats of high solids PPG clear coat. The last three pictures show it cleared. Next week, after sufficient drying time, we will sand it all back down again and buff it out to an ever higher gloss than this. Stay tuned.