We are putting the finishing touches on the beetle. Now that the body is wrapped up, its time to get the wheels done. We had to strip several layers of paint off of these wheels before painting them. Once all of the old paint was removed, we prepped them and set them up in the booth for painting. First Paul sprayed a coat of epoxy sealer over the metal. Once that was dry 3 coats of paint was sprayed followed by 2 coats of clear coat. I must have missed the picture of them cleared, Ill try to get one tomorrow with the tires mounted. If we can get those back early enough, they will be installed tomorrow as well. Only leaving a good detail before this little bug is ready to go back home.
Posted on March 2, 2016, in 1979 Beetle, Uncategorized and tagged auto body repair, auto body shop, auto paint, automotive paint shop, Base Coat, body repair, body repair shop, body shop, body work, Burlington NC, Clear Coat, High Performance Finish, Jmc Autoworx, jmcautoworx, Paint, Paint and body shop, paint shop, PPG Paint, Prime. Bookmark the permalink. Leave a comment.