Daily Archives: February 21, 2017
The prep on the Ghia is coming along very well. The car has been fully block sanded and most of the outside has had its final sand. We do have a little more sanding to do in the trunk and engine compartment before we are ready to pull the trigger. We only have a coulple of small areas to reprime and a couple more hours of final sanding before paint hopefully on Friday.
We had sent this FJ out to get some mechanical issues addressed while our work load here at the shop was up. We did get it back last week and today we were able to devote some time to it getting this project started back up. What Cole is working on here is repairing where the lower rocker panels were welded in. We removed the rear doors and used a grinder to smooth up the welds. We then applied a coat of metal filler to smooth up the welds. Once that product was dry, it was sanded smooth. He then went over those areas as well as a couple of other places in the jambs to make sure they all look smooth. Once these areas a taken care of we will do the same to the seams where the front doors are before priming the new rockers.