Closing in

This past Friday was another good progress day on the FJ, we were able to get the doors painted. We started off by masking off the freshly trimmed out backside then flipped them over and prepped the front. Paul started with coat of urethane sealer followed by 3 coats of the white. Once all that was dry, we carefully masked off the line for the red and papered up the white. Three coats of red was then sprayed on the lower parts of the doors. We then unmasked the white and applied the clear coat. While Paul was spraying the doors, Jordan and Cole built the rear bumper and installed it with all new hardware. This week we will get the doors back on the vehicle and continue the assembly process.