Monthly Archives: October 2017
We were just about to wrap up the FJ with a spray in bedliner on the floors in the front seat and rear seating area when we came across a previous repair on the passenger side floor. Someone had used “Great Stuff” an expanding foam insulation to fill in a rather large hole in the passenger side floor board. Not an ideal repair but Im pretty sure it was an inexpensive one. Anyway, we couldnt leave the not so great stuff in there so we dug it all out and replaced it with metal. Once it was all welded in Jordan and Cole got to work prepping the rest of the floor for the bed liner. We use a urethane product for things like this called Raptor liner. Its perfect for this application. It looks good, durable and water proof. We started with a coat of epoxy over the entire floor. Once dry, we applied 2 coats of the Raptor liner over the epoxy. This will dry over night and we will spend the rest of the week putting the finishing touches on this project.