Bed lining the floor
We were just about to wrap up the FJ with a spray in bedliner on the floors in the front seat and rear seating area when we came across a previous repair on the passenger side floor. Someone had used “Great Stuff” an expanding foam insulation to fill in a rather large hole in the passenger side floor board. Not an ideal repair but Im pretty sure it was an inexpensive one. Anyway, we couldnt leave the not so great stuff in there so we dug it all out and replaced it with metal. Once it was all welded in Jordan and Cole got to work prepping the rest of the floor for the bed liner. We use a urethane product for things like this called Raptor liner. Its perfect for this application. It looks good, durable and water proof. We started with a coat of epoxy over the entire floor. Once dry, we applied 2 coats of the Raptor liner over the epoxy. This will dry over night and we will spend the rest of the week putting the finishing touches on this project.
Posted on October 25, 2017, in 1978 FJ Cruiser and tagged 1978 FJ 55, auto body repair, auto body shop, auto paint, autobody repair, automotive paint shop, body repair, body repair shop, body shop, body work, Burlington NC, classic car restoration, Custom paint, FJ, FJ 55, FJ Cruiser, Jmc Autoworx, Paint, Paint and body shop, paint shop, Raptor Liner, restoration work. Bookmark the permalink. Leave a comment.