Monthly Archives: July 2018
The ’57 is ready for its turn in the booth. The past couple of weeks we have been working on getting it ready for paint and Monday is the day. We have meticulously sanded this vehicle and spent quite a bit of time blowing out all the nooks and crannies where dust can hide. We have changed the booth filters and washed it down. Monday we will finish prepping the booth and finish masking off the car. We will start by applying a coat of sealer over the entire car. We will then paint the roof white and when that is dry, we will mask it off and paint the body the Tropical Turquoise. We will then follow that up with 3 coats of PPG’s 2021 high solids clear. Its been a long while coming but this ’57 will be looking good again in a few more days.
The owner of this 2003 Silverado wanted to freshen things up a bit. He bought the truck new and since it still ran great but looked bad he decided to paint it. After discussing his options we came up with a plan and got to work. We started by removing the lights, bumpers, handles, moldings and mirrors. We then sanded the whole truck down and fixed the very few small dents that it had. We then washed it a couple of times to make sure we had a clean truck, clean jambs and clean engine bay. We then masked off the ares that were not getting paint and started spraying. A few coats of PPG black followed by a couple coats of PPG’s high solids clear coat and we have very nice Silverado that shines better than new.
Although we haven’t posted in a while on our restoration projects, we have worked on them some. Here is the cab on the C-10 that we have been working on. We started with the bed a couple of months ago and now we are onto the cab. As you can see its already in epoxy primer and we have started some body work. We did find a few too many pin holes to repair in the left and right floor pans so we will go ahead and replace them in a week or so. We have gotten a start on the body repairs in the meantime. Keep an eye out for this one. Its going to be a real head turner.
After many weeks of going full tilt on collision cars, we have opened up some breathing room and are back on the oldie goldies. We spent some time off and on block sanding this ’57 but the past couple of days have been pretty prosperous. Block sanding a vehicle with this much surface area was pretty time consuming as well as hard on the shoulders and elbows. The firewall was another area that was pretty tedious. Now, most of that is done and we really just have a few corners and channels to sand and a few places in the trunk before its ready for paint. It should be a real looker when we have all the color on it.