Daily Archives: September 14, 2018
After a few good days of prepping the floor and bottom of the cab we were finally able to spray it. The first couple of pictures show how not prepping panels properly turn out. The black peeling paint is actually POR 15. It was improperly applied so we removed it before applying our coatings over it. We started with a coat of PPG’s DPLV epoxy primer over the bare metal and properly prepared panels. We actually did that yesterday afternoon. This morning we came in applied SEM seam sealer to the seams and the weld areas where patches were installed. Once the seam sealer was dry, Jordan sprayed 2 coats of Raptor liner over the DP. This well provide a water proof barrier for the under side of this truck that will still look very nice. While we were at it, we also sprayed the inside of the bedsides that are exposed to the bottom of the truck. Up next, its time to start spraying some panels while we finish up the body work on the cab.