Author Archives: Jonathan
The ’57 is getting its doors. After installing the door and trunk rubber we are ready to get these back on where they should feel right at home. Lining up the left door went pretty smoothly. We still have some fine tuning before moving to the other side. We will be installing the latches and catches once we are happy with the fitment.
Great progress was made on the C-10 project today. Cole and I worked a good portion of the day blocking out the roof and fixing dents. We worked some on the inside of the cab as well as the left door jamb. The fire wall is pretty close to being finished as well. Tomorrow we plan on attacking it like we did today and hopefully that will put us pretty close to priming it again.
The progress continues on the C-10. We are working hard to make sure the body work on the cab is as nice as the rest of the panels we have ready to paint. The cab needs pretty extensive body work but each day we get a little closer.
The ’57 got a trunk today. We installed the rubber on this and the doors last week and today we were able to get the trunk installed. Tomorrow a door goes on and the last door hinge should get painted. We had to send that hinge over to our buddy Kelly to get it repaired. One of the decorative covers was bent up pretty badly and he worked his magic on it and was able to save it.
Paul was back on the bug today. Last week he stripped off the e-coat and primed the fenders. The next day he blocked that primer out and fixed a few dents. The next day he primed the parts once more and then had time to prep the bottom side for epoxy and bed liner. Those steps were completed last Friday. So today he blocked them out one last time and prepped them for paint. He did have enough time to get them painted today as well. Lots can get done when things go smoothly and here is a fine example. These came out really nice. Tomorrow we will hang the fenders on the body but they wont quite be ready to fully bolt on. We are still waiting on a few rubber parts to come in. The fender beading is one of them.
Now that all of the sanding, buffing and polishing is complete, lets start putting this beauty back together. We like to start with the seals. Its much easier to install these while the parts are off and you can get around them. They also aid when lining up the panels. If you align the panels without the gaskets, you may have to adjust them again when you do install them. No since in doing it twice. We ordered our parts from Danchuk. These rubbers are very nice. They fit very well and come in bags labeled for where it goes. As you can see they look great as well. Goals for this week are to start hanging parts and getting them operational. That means the latches and mechanisms that make these parts functional will all be cleaned inspected and lubed up for installation. Stay tuned.
The body work on the ’55 is coming right along. We have been blocking the car out to find what needs to be straightened and what we can straighten with blocking and priming. This car has had some nice work done in the past but we will be fine tuning what they started. As you can see it does have several places that need attention and about that many more that we haven’t gotten to yet. Next week we should be able to start spraying some primer on these repairs. Once that happens another good blocking to make sure we didn’t miss anything then start prepping for paint.
A few parts trickled in today so we were back on the bug. We finished installing the sound deadner on the luggage compartment and on the roof first thing. You would be amazed at how much that stuff will quiet down a car. We then finished rebuilding the vent windows. Well the right one anyway. Once it was complete and the glue was dry on the felt channel it went into the door. Next was the other felt channel that goes at the back of the door and finally the door glass. This all went very smoothly. We were also able to install the license plate housing and the speedometer. Guess you will have to see that next post. I forgot to snap a picture of it. We also completed a bit more of the wiring and ran the brake lines from the reservoir to the master cylinder. Not super exciting stuff, but progress none the less.
This little beauty has been brought to us to finish up a long ago started restoration. Its a ’55 Chevy 2 door post car, one of my favorites. Tons of work has already been completed on the car a few goodies include rack and pinion steering, coil over shocks, big V8 and several other things. The owner wanted to dechrome the car so the first thing we did was weld up all of the molding holes. You may notice that we didnt have to weld up the ones in the quarters. Those panels have already been replace years ago and the new panels didnt have molding holes. Once the holes were welded up we started repairing the areas and blocking out the entire car just to see how the body looked. Not too bad. We do have some work to do but it should go along pretty smoothly. The car will be painted the green that you see here when its finished.