Category Archives: 1955 Chevy
It’s been very busy around the shop for the past few weeks. We have had tons of collision repairs which hasn’t left us much time to work on the restoration cars. We did manage to squeeze in a few hours here and there to get these parts ready for paint and while we were waiting on parts we we decided it was the perfect time to spay them. I’m not sure it this is an actual factory color, the owner had already picked this color before we started the project but I do really like it. We started with a coat of sealer followed by 3 coats of DBC base coat and 2 coats PPG’s 2021 clear. The body work on the rest of the car is coming along great hopefully we can get into the booth soon.
We shot a few coats of primer on the ’55 hood and trunk today. As you can see they were in pretty good shape. We did have a few places that needed some attention but once they were straight and the booth was open, we slid them on in. These parts will be blocked one more time to be sure they are ready for paint. Its a long process but it really pays off in the end.
The body work on the ’55 is coming right along. We have been blocking the car out to find what needs to be straightened and what we can straighten with blocking and priming. This car has had some nice work done in the past but we will be fine tuning what they started. As you can see it does have several places that need attention and about that many more that we haven’t gotten to yet. Next week we should be able to start spraying some primer on these repairs. Once that happens another good blocking to make sure we didn’t miss anything then start prepping for paint.
This little beauty has been brought to us to finish up a long ago started restoration. Its a ’55 Chevy 2 door post car, one of my favorites. Tons of work has already been completed on the car a few goodies include rack and pinion steering, coil over shocks, big V8 and several other things. The owner wanted to dechrome the car so the first thing we did was weld up all of the molding holes. You may notice that we didnt have to weld up the ones in the quarters. Those panels have already been replace years ago and the new panels didnt have molding holes. Once the holes were welded up we started repairing the areas and blocking out the entire car just to see how the body looked. Not too bad. We do have some work to do but it should go along pretty smoothly. The car will be painted the green that you see here when its finished.