The Camry had its turn in the booth today. As you can see things turned out very well. We all jumped on it this morning. Masking off the areas that were not getting painted and prepping the ones that did get painted. Paul then sealed the new panels, sprayed three coats of the base coat white, then three coats of the pearl mid coat, then wrapped all that up with 2 coats of PPG’s high solids clear. Tomorrow we will start the reassembly process. We hope to be getting this one back to the owner on Friday.
A little head light restoration today. The lights on this Camry have seen better days. We started by removing the lights and prepping them. This involves sanding off all of the yellow caused by the sun. The yellow is actually the plastic rotting from the UV rays from the sun. We must remove all of that to make sure we get a great repair. We then use special products to make a chemical bond between the plastic and the clear coat. Once they have been cleared and dry, they are ready to go back into the car. As you can see, the difference is clear. This makes a major improvement in night driving. I have seen lights so bad, they won’t pass inspection. So after you have tried all the home remedies like tooth paste, bug spray and cooking spray, bring your car to us so we can do it properly with lasting results.